Floor pans

When I removed the driver's seat I noticed some surface rust on the driver side floor pan. I used a wire brush on a drill and steel wool to remove the loose rust, applied rust remover, primed and painted. I forgot to take a before picture but here is the after picture of the driver side front floor pan


I also found surface rust when I removed the back seat to replace the package tray for rear speakers. The back passenger floor pan had rust over a large area.



The front floor plan only had a few spot where the paint appeared to be scratched off.


I used a stripping wheel on a drill and steel wool to remove the loose rust. I then applied rust reformer, primed and painted.








There was also some rust behind the passenger side kick panel